Chrome Plated Bar/Rod Introduction – by Chrome plated Shafts Manufacturer
Chrome plated bar is known as chrom plated rod also, they are the same product. This product is usually manufactured from cold rolled or hot rolled carbon steel round bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a certain plating thickness such as min. 20 microns (0.0008″), min. 25 microns (0.001″), min. 50μm (0.002″) and so on.
SKYLINE is a leading China chrome plated bar manufacturer factory. We produces and supplies many types of chrome plated rods /chromed shafts with full range of steel grades and dimensions.
As the chrome plated bar/ rod is usually used as hydraulic cylinder shafts, pneumatic cylinder shafts and other machine shafts, so they are known as Hard Chrome Plated Shafts also.
CONTENT
Main description of Chrome plated bars
Product Materials
- SAE 1045: SAE 1045 hard chrome plated bar
- CK45: CK45 chrome plated rod
- C45: C45 chrome plated bar
- C45E: C45E hard chrome bar
- SAE 4140: 4140 chrome plated bars
- 27SiMn: 27SiMn chrome plated bar
El Tamaño De Los Productos
Our hard chrome plated shafts / bar /rods are available with sizes as below.
Metric Size: Diameter min. 10 mm, and max. 800 mm；
Imperial Size: diameter 3/8″ to 30″
Length: fixed length 100mm to 13000 mm, random length available.
Tolerance: f7, f8, g6, and so on.
Chrome plated bar Heat treatment
Chrome plated shafts can be supplied with heat treatment condition as below.
- Induction hardened, high frequency hardening, etc.
- Q&T: Quenching and Tempering heat treatment
Chrome plated rod Surface Condition
The surface roughness of the chrome plated bars comes in two series which are Max Ra 0.2 μm and max Ra 0.4μm.
Chrome plated Thickness
The chrome layer thickness of our chrome plated bar is Available in Min. 20 microns, 25 microns, 30 microns, 50 microns, ... 100 microns.
